PLA Ingeo™ - 3D Printing Filament

Home > 3D Printing Filament > PLA Ingeo™

^{PLA - 3D Printing Filament Size: 1.75mm & 2.85mm}
^{Nozzle size}	^Any	^{Nozzle temp.}	^{190-230° C}	^{Bed temp.}	^{0° C/(50-80° C)}
^{Layer height}	^0.1-0.35mm	^{Print surface}	^Any	^{Print speed}	^Any
^Fan	^50-100%	^{NOTE: Start with 0.2mm Layer height and 200° C}
^{Printing Suggestions: Suggested Printing settings are meant as guidelines to find the ideal settings for your machine.}

Performance Requirement	Market Expectation	Ingeo Performance	ABS Performance
Temperature in printing	Lower is better for safety and control	190-230°C possible, sharp melting behavior	230-250°C
Vapor or odor in printing, EH&S	Low or no emissions / smell, small particulates	Very low emissions & studies show lower particulate count	Strong negative odor and higher particulate count
Heated build chamber	Ideally not required & IP limits implementation for some users	Does not require heated build chamber, but opportunity to leverage	Required to avoid warping while mfg. larger parts
Fusing performance	Fuses easily, sticks to self and build chamber	Good fusing and build platform adhesion	Difficult to stick to certain build platforms
Thermal shrinkage	Low shrinkage	Excellent, low shrink	Warps on larger builds